Blog
News Repost
medical device magnetic components
Revista Española de Electrónica

Infineon improves battery efficiency with an ultra-low-power magnetic switch for medical and consumer devices

November 17, 2026AIC Engineering
Infineon improves battery efficiency with an ultra-low-power magnetic switch for medical and consumer devices / 英飞凌利用超低功耗磁开关提高医疗和消费设备的电池效率

Infineon Technologies AG is expanding its XENSIV™ magnetic sensor portfolio with the TLV55624-1O magnetic switch, based on TMR technology. This device combines ultra-low current consumption with direct load switching in a single component. This reduces standby power…

Republished by AIC Engineering. All rights belong to the original publisher; see Source below.

Infineon Technologies AG is expanding its XENSIV™ magnetic sensor portfolio with the TLV55624-1O magnetic switch, based on TMR technology. This device combines ultra-low current consumption with direct load switching in a single component. This reduces standby power consumption in always-on systems and can minimize external components at the system level. The TLV55624-1O is designed for battery-powered medical and consumer devices requiring long lifespan, a small footprint, and reliable activation. Typical applications include continuous glucose monitoring (CGM) patches, disposable medical devices, wearables, smart glasses, augmented/virtual reality devices, and hearing aids.

The TLV55624-1O has a current consumption of approximately 7 nA. Its continuous output of up to 50 mA allows for direct switching of connected electronics. In continuous glucose monitoring (CGM) patches, the switch can activate the device upon removal from the applicator. Activation occurs automatically, without the need for NFC, a smartphone, or an additional controller. In one example with a 6 mAh silver oxide battery, the switch can extend battery life up to ten times.

“Continuous glucose monitoring (CGM) patches require ultra-low power consumption during storage to maximize their shelf life without compromising availability or impermeability,” says Thomas Cemernek, senior product manager at Infineon. “The TLV55624-1O combines ultra-low current consumption, contactless magnetic activation, and direct load switching in a single device. This allows manufacturers to simplify system design and reduce both board space and the number of components. As a result, they can develop compact, sealed CGM patches that are ready to use whenever patients need them.”

The TLV55624-1O operates from 1,1 V to 3,6 V and supports low-voltage battery architectures. It integrates a TMR sensing element, comparator circuitry, power management, and a push-pull output stage. Dedicated LOCK and FSLP pins maintain the output state or force sleep mode. An integrated transient filter ignores transient magnetic fields before the output state changes. Omnipolar sensing simplifies magnet selection, as the device responds to both magnetic north and south poles. The PG-XQFN-7-1 package measures 1,50 x 1,50 x 0,38 mm³ and supports compact PCB designs with close magnetic coupling.

Source